UHF Male to N Male Adaptor (75ohm)
Applicable StandardIEC60169-12
UHF Specifications:
Electrical and mechanical:
1.ImpedanceNon-constant
2.Frequency range: 0- 1000MHz
3.Voltage Rating500 volts peak
4.Mating5/8 threaded-coupling
5.Cable affixmentBraid solder ,set screw, clamp and crimp
Material and finish:
1.Male contact: Brass with silver plating
2.Female contact: Beryllium copper with silver plating
3.BodyBrass Nickel and sliver plating
4.Other metal partsBrasss Nickel
5.Insulators: PTFE
6.Temperature Range-65°C to +165°C
7.WeatherproofExcept as noted ,all UHF series are non-weatherproof.
Applications:
1. Antennas
2. Cable Assembly
3. Low Frequency Applications
4. Public Address Systems
5. CB Radios.
Applicable StandardMIL-C-39012;CECC-22210;IEC 60169-16
Electrical characteristics:1).Nominal impedance: 75 ohms2) Frequency range: 0- 11GHz3) Withstand Vol.: 4000V4) VSWR: max. 1.155) Contact resistance: a) Inner conductor: max. 1.0M ohmsb) Outer conductor; max. 0.25M ohms6) Isolation: min. 5,000M ohmsMaterial and finish: 1) Body: brass nickel plated 2) Sub-assembly: brass nickel plated3) Outer conductor: brass nickel plated 4) Inner conductor: beryllium copper5) Dielectric: PTFE 6) Durability: min. 500 cyclesApplications:
1)Antennas 2) Base station 3) Broad cast 4) cable assembley
5) cellular 6) components 7) Instrumentation 8) Microwave Radio
9)Mil-Aero 10) PCS11) Radar12) Radios
13) Satcom 14) Surge Protection15) WLAN.
Note:
1) These characteristics are typical but may not apply to all
connectors.
2) OEM and ODM are available.
